Description
The Aspiration Bottles were developed for use in aspiration equipment, performing secretion collection during the medical-hospital procedure.
Codes and Descriptions
006147 – FRASCO PP 5,0 LITROS COM TAMPA
Intended Use
The Aspiration Bottle is intended to retain secretions collected with the aid of secretion aspiration equipment or gas network in medical-hospital procedures
Technical specifications
5 LITER PP BOTTLE DIMENSIONS
Conical Diameter: 190 x161mm
Height: 350mm
Lid: Polypropylene (PP)
Bottle: Polypropylene (PP)
Lid Sealing Ring: silicone
Kit Bóia: Polypropylene (PP)
Buoy Kit Sealing Ring: Nitrile Rubber
DIMENSÕES DO FRASCO
Conical Diameter: 190 x161mm
Height: 350mm
Desinfection / Sterilization
Peracetic acid
Prepare the 1% Peracetic Acid solution for high-level disinfection according to the manufacturer's instructions, keep fully immersed in the solution for a period of 15 minutes using gloves, rinse in sterile water and let dry at room temperature or dryer for maximum time 15 minutes, assemble the product and preserve it to keep it safe from contamination until use.
Ethylene Oxide (C2H4O)
Use an appropriate germicidal solution or Ethylene Oxide (C2H4O)
Sterilization using Ethylene Oxide gas must comply with the temperature parameters at 54ºC (130ºF).
When using Ethylene Oxide, follow the instructions provided by the sterilization equipment manufacturer to determine the indicated temperatures and aeration times.
DISINFECTION / STERILIZATION
For low-risk disinfection, use 0.5% Peracetic Acid for a period of 10 minutes and follow the sequences described above.
After sterilization in Ethylene Oxide, wait 24 to 48 hours before using the material, to allow for aeration and the release of gas residues.
AUTOCLAVE
ATTENTION! The 5 liter bottle in PP Standard IT MOST NOT ser submetido à autoclave, pois não suporta as
temperaturas deste processo e será danificado.
EN 
BR 
ES 
